THE THIRD VISIT

lt was January 12, 1977 and the hour was the same and our difficulties began to mount, for we were too frequent a visitor not to be noticed and reported. In knowing a few higher officials of the Egyptian government, we were granted permission to measure and re-measure the exterior of the Pyramid on our guise that technical data had to be updated on its structure. To be on hand for this night’s journey, we were at the Pyramid from 10 A.M., worked around its base, dug a few holes, examined some odd hundred stones, and in general, looked as though we were experts in geometry and metrics. As the guards left, one at a time, we just beckoned that we were staying on to complete our day’s chore. To be perfectly honest, by the time the climb started, we were too exhausted to care if we were spotted.

From a time of 10 A.M. until after 2 P.M. the following day, our fears lessened on getting caught but mounted at the very aching thought of climbing 470 up and 980 feet down – all in the same 24-hour period. This time, we prepared ourselves with well packed (compressed to small packets) sleeping bags, added food supplies and water – for a much longer stay. Since activity begin to stir with the Egyptian officials, every expedition could have been our last and on this trip, we were prepared to examine the machinery (if one could use this crude description), take additional photos and expand our excursion to other floors. To accomplish this, each of the four had to be given specific duties for specific areas of the four floors. Time did not allow for the wondering of all who were not engaged in the process of photography. A portable stand had been rigged that would hold a light while pictures were taken. Thus the third trip was underway.

While the chosen photographers held the fort at the Grand Hallway, others were stationed at the opposite end of the hall to inspect the varied machines, during just one part of their stay. Much had to be viewed and little time to complete all that had to be done. To tour the complete complex, just five hours were devoted to four sections each and if satisfactorily completed, a move to another station would be required. In reality, all of this was a total impossibility, for if you consider we were trying to review ancient records dating back a half million years in the short time allotted, it could not be done even with a twenty man crew and all of the latest technological instrumentation. As an end result, only a minute portion of this in-depth sanctuary was scanned..

Among the artifacts, as we shall call them for the sake of a description, there were stored (or displayed) at the last room to the right of the Grand Hallway a composite of computers, what we would term visa phones, forms of computer communication – to where – still remains an unknown factor, a screen similar to a television set only encased in this same metal used on all the discs, graphic charts showing the perimeter of creation (not the universe), instruments with sensorized plates on a console, and one very strange piece of instrumentation that took many hours to figure out. It could have resembled a giant commercial searchlight (arc light) that is used today to pierce the night skies at grand opening events.

This particular machine, and once again, of a non-electronic nature, meaning it had no visible wires or underground cables such as a powerful light may need. Behind its transparent metal shield (a form of see through glass but of metal) you could distinguish the fact it had an odd type filament connected to its throat of the cylinder. Behind this arc light type of machine and attached to the supporting neck stem, there was a metal box 21″ x 21″ by 7,” which was in the form of a computer -to turn on and off or move it in any direction. This small computer bearing tiny glass or a plastic substance over tiny holes could be described as the small covers over interior lights that would flash on and off, had it been in operation. There were larger plates that were sensorized to the touch and one such plate, by the wave of a hand, started its function. The markings on a faceplate, after translation meant “antigravitor.”

After further study, it was revealed that this particular manmade device actually created an actual anti-gravitation field ray that would be capable of lifting a stone block of many tons’ weight into mid-air, allowing it to be suspended or hover -then set such material down on a precise target. This type of device was undoubtedly the operational machine that was used for the construction of the Great Pyramid, and could be a form of mechanicalized levitation. How it was or is powered must have been concealed within its large and bulky base, which on examination, appeared to be seamless and without a weld or divided joint. This machine, as strange as it will seem to all readers, was completely operational at the time of the examination.

lt was, after two hours of scanning, found operable by a wave of a hand over a red lensed inset. To prevent any type of an alarm from being sounded, its very high-pitched tone only remained on for five short seconds. During this brief interlude, the flashlight, held by Sherman Stiles actually lifted from a downward held position to one of pointing directly to the ceiling and for fear of both an interrupted alarm system and the possibility of one of us being suddenly suspended, it was cut off. This sound began similar to the low pitch of any violin and each split second the pitch began to increase – or wind up to a peaked out crescendo. It was estimated that when this sound finally reached its peak, it would be well beyond the hearing range of the human ear.

Although this seems a bit far-fetched, George Makefield of Toronto, Canada experimented with a similar invention in 1931. His machine was proclaimed by both the British and American governments as a hoax and could not possibly work. At a demonstration in Ottawa, George Makefield proved his anti-gravitational machine could completely lift a 1930 Buick Sedan six foot off the ground and hold it in suspension two and a half hours, but due to the cost of whatever energy he used did not validate it as a functional item Still with this demonstration, both governments stalled their acceptance of the mechanism until Makefield died – and took the bases of his invention to the grave with him. He died in poverty as have other famous inventors.

In a similar situation, a George WorI of Philadelphia experimented with an identical machine in 1937 where he had recorded the sound and vibrations of a violin’s high “C” – then magnified it 20,000 times. This unheard sound and vibration lifted a solid form of concrete weighing five tons. It remained suspended until he took possession of the violin once again and struck a discord. Instead of the block lowering gradually, as did the Buick car, it crashed to the laboratory floor. WorI was on the right track but before perfecting his instrument, he died. Thus, such a device was known during our early 1930’s here in this country and Canada and to have experienced it at the tomb comes as no great surprise. Many such elaborate inventions have surfaced in the past two generations, but due to skepticism by those who control government spending, as well as private investors, almost as many inventions die on the vine without the general public having the slightest inkling of what was accomplished by many world greats.

Now that this device was finally discovered on how the Pyramid was built (by the use of more than one machine), the question remains – who built it and who the inventors were for such an unequaled machine. Another article worth an honorable mention is rated almost as strange, if not more so. Its basic description is more mystifying than all other myths of the past and is one that should have been witnessed in the future of the twenty-fifth century – and not an artifact of thousands of years past. This item, or whatever one chooses to call it was a giant-sized metallic ring, carrying a diameter of 25 feet, with a tunnel-like depth of twelve feet.

At a quick glance, one could term it crudely as a large piece of underground sewer pipe, cut off from its regular length – only this conduit was of an unusual metal rather than concrete.

The exterior (and being at least four inches thick) had a shiny smooth surface, similar to the skin of a flying saucer. Again, such a metallic surface could not be marred by any type of tool, and every metal surface exposed within the tomb revealed no paint or dye whatsoever. On the far right, as you would face its front (and this was difficult to determine) there was a similar computer box to the one round on the anti-gravitational machine. Because of the previous experience of high frequency sounds, this machine remained the unknown factor as to its operation, for no one dared to activate it.

On the inner surface, the structuring was somewhat different. The entire inner rim showed tiny thin lines, beginning at the outside lip of the ring, and ran in a tight continuous spiral that ended at the opposite lip, twelve foot through its depth. These thin lines were cut into the metal at least two inches, as far as could be determined and between these spiral lines, its walls were of a rough glazed surface and far from smooth. The floor was as round as the outside shell, except for one particular point. At a point midway, there was a horizontal bridging that was connected to each side of the normal curvature of the bottom. It looked, for all appearances as a platform where one might stand prior to the machine being activated.

With the help of our own technical engineers and then others over the next two years, the theory that was expounded upon regarding this unusual ring could be only expressed two ways. From its design of the spiral rings within a ring, it could be a form of a ‘Time Machine” or a “transferral ring” of teleportation (placing a person from one vantage point to another by a re-arranging of the physical atom structure). (Refer to the book “Beyond Our Galaxy” and ‘The Universal Oneness” by this same author, for a clearer explanation). In studying nineteen close-up photos of this unusual ring, the answer would have to lie with one of the two theories. As far as our technologies go, such a ring of unusual metal could serve no other specific purpose and still a “Time Machine” seems fictional.

Another item of an ancient artifact was found in a room enclosure but had in unlocked metal door. This chamber room was totally empty except for one miniature-size Pyramid boldly placed in the center of the floor. It was not picked up, but it was measured. From all measurements, it was a scaled down replica of the Pyramid Gizeh, yet not an actual model as one would expect. This miniature pyramid, measuring 7.62 inches of each side of its base and a height of 4.86 inches, did represent a replica since the Pyramid itself was 762 feet by 486 feet in height. Its miniaturized structure was of a trans-illuminated material – similar to a pyramid built of solid plastic. From its flat apex, one thin wire protruded upward 2.86 inches and this wire was the identical thickness of a piano wire of the thinnest degree. There were no buttons, sensorized discs or portals of tiny lights. From all outward appearances, it served no obvious purpose, but then the obvious is not always the real intent. After four years of studying the four photos, this device still remains a mystery, totally unsolved.

~ continues soon ~